-
Sale!
Q-8306-L2 QRT MAX Fully Automatic, self tensioning, automatic locking, wheelchair tie down system with combination Retractable Lap and Shoulder Belt with L-Track Fittings and Retractable Height Adjustor with 131 Degree Bracket. The QRT MAX Retractors provided in this Kit are mounted for L-Track Anchorages. This Kit will not include the L-Track Floor Anchorage. This kit includes FREE SHIPPING and the Following: (4)-Q8-6209-L QRT MAX Retractors (L-Track) (1)-HR131 Retractable Lap & Shoulder Belt with Retractable L-Track Height Adjuster and 131º Bracket (Q8-6326-A1-HR131)1-Mounting Bracket for Shoulder Belt 1-Instruction Adhesive Label 1-QRT Installation Instructions 1-Instruction Guide for Operator 1-Warranty Card (3 Year Manufacture Warranty) -
Sale!
Q’Straint Q8-6325-T QRT Occupant Securement Lap Belt. The Q8-6325-T Paradelle Lap Belt attaches to L-track Anchorages on the Vehicle FLoor. The Q’Straint Occupant Restraint Lap and Shoulder Belt are vital safety components to the QRT MAX, QRT Deluxe and QRT Standard and 4-Point Wheelchair Securement. The QRT Occupant Restraint system operates in conjunction with the Pin Connector located on the QRT Retractor. It is important for passenger that both the occupant restraint lap and shoulder belt are implemented to ensure passenger safety. -
Sale!
The Q'Straint Q8-6326-A1-HR131 Retractable Shoulder & Lap Belt Combination with Retractable Height Adjuster. Shoulder Belt Mounted with L-Track fitting on Top and Bottom and 131º Angle Bracket Free Shipping -
Sale!
ure-Lok FE501 Manual Securement Kit with Snap Hook and D-Ring, A-Track Series. The FE501 includes the following; 2-FE200619 Front Cam Buckle Straps, A-Track 2-FE200620 Over Center Buckle Tie Down Strap, A-Track FREE SHIPPING -
Sale!
The TITAN800 was designed and engineered to address maximum load capacity to meet industry regulations and requirements of the WC18. The technology built into the TITAN800 produces innovative energy distribution and stronger webbing for maximum load capacity. The TITAN800 AL827S-4C includes the following: 4-AL800855S Retractors, PLI L-Track -
Sale!
The FE753NA048-04-3 is Flange Series Omni L-Track, 48" Length, pre-drilled with 5/16" Mounting Holes. Omni L-Track has been tested and is certified compatible with Q'Straint or Sure-Lok Retractors. The FE753NA048-04-3 Ships for FREE The FE75NA048-04-3 requires a minimum purchase quantity of 2. Please contact us directly for discounted prices on 10 or more. L-Track is the most common floor anchorage utilized in wheelchair securement industry. It provides superior strength in with regard to wheelchair tie downs and allows maximum flexibility in accommodating a wide range of wheelchair designs and configurations. Omni Track is an aluminum alloy 6061-T6 and is the only L-Track tested and approved for use in both Q’Straint and Sure-Lok wheelchair securement and occupant restraint products. L-Track is the most common floor anchorage utilized in wheelchair securement industry. It provides superior strength in with regard to wheelchair tie downs and allows maximum flexibility in accommodating a wide range of wheelchair designs and configurations. Omni Track is an aluminum alloy 6061-T6 and is the only L-Track tested and approved for use in both Q’Straint and Sure-Lok wheelchair securement and occupant restraint products. -
Sale!
Q-8300-A1-L QRT MAX Fully Automatic, self tensioning, auto locking, wheelchair tie down system with Combination Occupant Securement Lap and Shoulder Belt. The QRT MAX Retractors provided in this Kit are mounted for L-Track Vehicle Anchorages. The Q-8300-A1-L Ships For FREE and includes the following:
4-Q8-6209-L QRT MAX Retractors (L-Track)
1-Q8-6326-A1 Combination Occupant Securement Lap and Shoulder Belt
1-Mounting Bracket for Shoulder Belt
1-Instruction Adhesive Label
1-QRT Installation Instructions
1-Instruction Guide for Operator
1-Warranty Card (3 Year Manufacture Warranty) -
Sale!
The Q'Straint M-300-L30 M Series complete Wheelchair and Occupant Securement kit that includes all components to effectively and safely secure a wheelchair or mobility device. The M-300-L30 includes Over-Center Rear Belts for tensioning and Cam Front Belts for slack removal. The M-300-L30 also includes the Occupant Securement Lap and Shoulder Belt with L-Track Floor Pocket Anchorages The Q’Straint M Series wheelchair and occupant restraint system is a cost effective manual wheelchair tie down system designed to satisfy strict budgets without compromising passenger safety. The M Series Wheelchair Securement System incorporates J Hooks for attaching the Wheelchair Straps. Attaching the strap will only require a quarter turn and minimizes the potential for twisting the Tie Down Strap The M-300-L30 kit includes FREE SHIPPING and the following:2-ML-110/111-C Over-Center Belts (L-Track)
2- ML-210/11C Cam Belt (L-Track)
1-MM-320 Integrated Lap Belt
1-MM-410 Shoulder Belt
1-Q5-6500A-5 Shoulder Belt Mounting Bracket
4-Q5-7571-A Oval L-Track Floor Pocket
FREE SHIPPING -
Sale!
Q'Straint Q-10007 QRT-360 L-Track Wheelchair Securement Kit with Combination Occupant Securement Lap and Shoulder Belt, mounted with PLI L-Track Fittings for use with vehicle L-Track Floor Anchorages. QRT-360 is a larger and stronger wheelchair securement system that is designed to withstand the punishment of additional weight of the wheelchair and occupant restraint systems. Q’Straint has incorporated a revised locking bar with 25 high strength teeth. The QRT-360 is also a fully automatic retractor that automatically tightens the wheelchair securement webbing created by small movements of the wheelchair in transit. The redesign of the J-Hook allows the securement strap to more easily attach to the frame on the wheelchair and the upgraded webbing is wider and heavier resulting in a pull test increase of up to 12,000 lbs. The QRT-360 also has adopted a larger release lever that is easier and accessible to the operator. The Positive Lock Indicator (available on L-Track only) provides clear optical confirmation that the retractor is locked in the vehicle floor. The Q’Straint Q-10007 Wheelchair Securement Kit includes four (4) Fully Automatic Wheelchair Tiedown Retractors and the Combination Occupant Restraint Lap and Shoulder Belt. This Kit will not Include the L-Track Floor Anchorages 4- (4) Q011012 Fully Automatic Retractors (L-Track) 1- (1) Q8-6326-A1 Combination Occupant Restraint Lap and Shoulder Belt 5- (5) Year Warranty -
Sale!
Q'Straint Q-8100-A1-A QRT Deluxe Fully Automatic, self tensioning, automatic locking, wheelchair tie down system with Combination Occupant Securement Lap and Shoulder Belt. The Q-8100-A1-A Retractors mounted with A-Track Fittings for vehicles equipped with A-Track Floor Anchorages. The Q'Straint QRT Deluxe is a Automatic-locking, self-tensioning, fully automatic retractable wheelchair tie-down system. The QRT Deluxe Fully Automatic features allow the operator to efficiently attach the wheelchair strap and J hook to a solid frame member on the wheelchair and automatically tensions the wheelchair tiedown strap and secures the wheelchair with the self-locking feature. This kit includes FREE SHIPPING and the Following: 4-Q8-6200-A QRT Deluxe Retractors (A-Track) 1-Q8-6326-A1 Combination Occupant Securement Lap and Shoulder BElt 1-Mounting Bracket for Shoulder Belt 1-Instruction Adhesive Label 1-QRT Installation Instructions 1-Instruction Guide for Operator 1-Warranty Card (3 Year Manufacture Warranty) FREE SHIPPING -
Sale!
Q'Straint Q-8100-A1-L QRT Deluxe Fully Automatic, self tensioning, automatic locking, wheelchair tie down system with Combination Retractable Occupant Securement Lap and Shoulder Belt. The QRT Deluxe Retractors provided in this Kit are mounted with PLI L-Track Fitting for vehicle outfitted with L-Track Floor Anchorages. The Q'Straint QRT Deluxe is a Automatic-locking, self-tensioning, fully automatic retractable wheelchair tie-down system. The QRT Deluxe Fully Automatic features allow the operator to efficiently attach the wheelchair strap and J hook to a solid frame member on the wheelchair and automatically tensions the wheelchair tiedown strap and secures the wheelchair with the self-locking feature. The Q-8100-A1-L includes theFollowing: 4-Q8-6200-L QRT Deluxe Retractors (L-Track) 1-Q8-6326-A1 Combination Occupant Securement Lap and Shoulder Belt 1-Mounting Bracket for Shoulder Belt 1-Instruction Adhesive Label 1-QRT Installation Instructions 1-Instruction Guide for Operator 1-Warranty Card (3 Year Manufacture Warranty) FREE SHIPPING -
Sale!
Q'Straint Q-8200-A1-L Ships for Free and is the QRT Standard semi-automatic, retractor wheelchair tie down system with Combination Retractable Occupant Securement Lap and Shoulder Belt. the QRT Standard Retractors provided in this Kit are mounted with PLI L-Track Fittings for use in vehicles outfitted with L-Track Anchorages The Q’Straint QRT Standard is the solution for addressing cost conscious budgets without sacrificing passenger safety. The QRT Standard features a semi-automatic retractor that allows the operator to tension the wheelchair tie down securement webbing with the single tensioning knob. This kit includes FREE SHIPPING and the following: 4-Q8-6201-L QRT Standard Retractors (L-Track) 1-Q8-6326-A1 Combination Occupant Securement Lap and Shoulder Belt 1-Mounting Hardware for Shoulder Belt 1-Instruction Adhesive Label 1-QRT Installation Instructions 1-Instruction Guide for Operator 1-Warranty Card (1 Year Manufacture Warranty) FREE SHIPPING -
Sale!
Q’Straint Q5-7581 11” Webbing Loop. The Q5-7581 webbing loop is a highly effective and economical product that can be used to assist in the attachment for the wheelchair tie down hook to a mobility device. Utilizing the Webbing Loop can also minimize potential abrasions from the contact with the wheelchair securement hook to the mobility equipment. The Webbing Loop is available in a variety of sizes and colors. The Q5-7581 has a minimum purchase requirement of 4. -
Sale!
Q’Straint Q8-6326-A1 Combination Occupant Securement Lap and Shoulder Belt. Q8-6326-A1 is designed to work in conjunction with the Q’Straint QRT MAX, Deluxe and Standard Systems. The “triangular fittings” on the Q8-6326-A1 attach to the “pin connector” or studs on the rear QRT Retractors. The Q8-6326-A1 utilizes one retractor positioned on either the lower wall or floor. FREE SHIPPING -
Sale!
Sure-Lok AL700868-4 Dual Retractable Integrated Combination Belt with triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor assemblies and a 45 degree mounting bracket on the upper retractor. The AL700868-4 provides an angled mounting bracket on the upper retractor to accommodate angled vehicle sidewall wire molding. For use with AL700 Titan Series Systems only. FREE SHIPPING -
Sale!
Sure-Lok AL712S-4C Self-tensioning, automatic locking, wheelchair tie down kit with S-Hook and Dual Retractor Combination Occupant Securement Lap and Shoulder Belt. The AL712S-4C includes PLI L-Track Fittings for vehicles outfitted with L-Track Floor Anchorages. The AL712S-4C Kit includes the following;2-AL700855S Right Hand Retractor ( PLI L-Track L-Track) 2-AL700907S Left Hand Retractor (PLI L-Track) 1-AL200727HA Integrated Combination Belt with Height Adjuster
1-Warranty Card (3 Year Manufacture Warranty)
FREE SHIPPING -
Sale!
Sure-Lok FE200746 Vinyl Storage Container The FE200746 provides practical and economical storage of the of the wheelchair securement system when not in use. -
Sale!
Sure-Lok FE514S-1 Complete Manual Securement Kit with Non-Retractable Occupant Securement System and L-Track Floor Anchorages. The FE514S-1 Kit will require FE200745 Sidewall Mounting Kit for the Shoulder Belt. The FE514S-1 Kit will include the Following: 1-FE200602RS Front Cam Buckle Tie Down, S-Hook, Right Hand 1-FE200602LS Front Cam Buckle Tie Down, S-Hook, Left Hand 1-FE200603RS Over Center Buckle Tie Down, S-Hook, Right Hand 1-FE200603LS Over Center Buckle Tie Down, S-Hook, Left Hand 1-FE200595 Integrated Lap Belt with Snap Hook 1-FE200710 Non-Retractable Shoulder Belt 4-Q5-7571-A Oval L-Track Floor Pocket This Kit will require FE200745 Sidewall Mounting Kit for attachment of the Should -
Sale!
Sure-Lok FF612S-4C FF600 Semi Automatic Retractor Kit with S-Hook Attachment and Retractable Occupant Securement Lap and Shoulder Belt with a Height Adjustor. The FF612S-4C include an S-Hook for attachment to the wheelchair frame and is designed for L-Track Vehicle Floor Anchorages. The FF612S-4C Kit includes the following; 2-FE200855S: Right Hand FF600 Semi Automatic Retractor with S-Hook Attachment. This Retractor is fitted for an L-Track Floor Anchorage 2-FE200907S: Left Hand FF600 Semi Automatic Retractor with S-Hook Attachment. This Retractor is fitted for an L-Track Floor Anchorage 1-FE200727HA: Retractable Integrated Combination Lap and Shoulder Belt with Height Adjuster FREE SHIPPING -
Sale!
The FE753NA100-04-3 Omni Flange Series L-Track, 100" Length with 5/16" Mounting Holes. L-Track is the most common floor anchorage utilized in wheelchair securement industry. It provides superior strength in with regard to wheelchair tie downs and allows maximum flexibility in accommodating a wide range of wheelchair designs and configurations. Omni Track is an aluminum alloy 6061-T6 and is the only L-Track tested and approved for use in both Q’Straint and Sure-Lok wheelchair securement and occupant restraint products. The FE753NA100-04-3 requires a minimum purchase of 10. For smaller quantities please contact our Customer Service Department at 866-268-8711 -
Sale!
The Q'Straint M-305-L30 M Series complete Wheelchair and Occupant Securement kit that includes all components to effectively and safely secure a wheelchair or mobility device. The M-305-L30 includes Over-Center Rear and Front Belts for tensioning. The M-305-L30 also includes the Occupant Securement Lap and Shoulder Belt with L-Track Floor Pocket Anchorages The Q’Straint M Series wheelchair and occupant restraint system is a cost effective manual wheelchair tie down system designed to satisfy strict budgets without compromising passenger safety. The M Series Wheelchair Securement System incorporates J Hooks for attaching the Wheelchair Straps. Attaching the strap will only require a quarter turn and minimizes the potential for twisting the Tie Down Strap The M-300-L30 kit includes FREE SHIPPING and the following:4-ML-110/111-C Over-Center Belts (L-Track)
1-MM-320 Integrated Lap Belt
1-MM-410 Shoulder Belt
1-Q5-6500A-5 Shoulder Belt Mounting Bracket
4-Q5-7571-A Oval L-Track Floor Pocket
-
Sale!
Q'Straint Q-8100-A1-HR-L QRT Deluxe self tensioning, automatic locking, wheelchair tie down system with combination Retractable Lap and Shoulder Belt with Retractable Height Adjustor. The Q-8100-A1-HR-L Retractors are mounted with PLI L-Track Fitting for vehicles equipped with L-Track Anchorages. This kit includes FREE SHIPPING and the Following: 4-Q8-6200-L QRT Deluxe Retractors (L-Track) 1-Combination Occupant Securement Lap and Shoulder Belt with Retractable Height Adjustor 1-Mounting Bracket for Shoulder Belt 1-Instruction Adhesive Label 1-QRT Installation Instructions 1-Instruction Guide for Operator 1-Warranty Card (3 Year Manufacture Warranty) FREE SHIPPING on this product -
Sale!
The Q'Straint Q-8300-A1-HR-L QRT MAX Fully Automatic, self tensioning, automatic locking, wheelchair tie down system with combination Retractable Lap and Shoulder Belt with a Retractable Height Adjustor. The QRT MAX Retractors provided in this Kit are mounted for L-Track Anchorages. This Kit will not include the L-Track Floor Anchorage. This kit includes FREE SHIPPING and the Following: 4-Q8-6209-L QRT MAX Retractors (L-Track) 1-Combination Occupant Securement Lap and Shoulder Belt with Height Adjustor 1-Mounting Bracket for Shoulder Belt 1-Instruction Adhesive Label 1-QRT Installation Instructions 1-Instruction Guide for Operator 1-Warranty Card (3 Year Manufacture Warranty) -
Sale!
Q’Straint Q-8600-A1-L QRT360 Wheelchair Securement Kit with Combination Occupant Securement Lap and Shoulder Belt with L-Track on the Top and Bottom, Mounted with PLI L-Track Fittings for L-Track Floor Anchorages. The Q-8600-A1-L Ships For Free and Includes the Following: 4- Q011012 Fully Automatic Retractors (L-Track) 1-1 Retractable Lap & Shoulder Belt with L-Track Fittings on the Top and Bottom 1- Five (5) Year Warranty -
Sale!
Q’Straint Q5-7580 14” Webbing Loop. The Q5-7580 webbing loop is a highly effective and economical product that can be used to assist in the attachment for the wheelchair tie down hook to a mobility device. Utilizing the Webbing Loop can also minimize potential abrasions from the contact with the wheelchair securement hook to the mobility equipment. FREE SHIPPING The Q5-7580 has a minimum purchase requirement of 4. -
Sale!
Q'Straint Q8-6326-A2 Combination Retractable Occupant Securement Lap and Shoulder Belt. The Q8-6326-A2 is a Retractable Lap and Shoulder Belt that provide two retractors that are positioned to efficiently secure the passenger in the wheelchair. The Q8-6326-A2 is compatible with all QRT Wheelchair securement Systems. The Q’Straint Occupant Restraint Lap and Shoulder Belt are vital safety components to the QRT MAX, QRT Deluxe and QRT Standard and 4-Point Wheelchair Securement. It is important for passenger safety that both the occupant restraint lap and shoulder belt are implemented to ensure passenger safety. FREE SHIPPING -
Sale!
Sure-Lok AL700868-2 Dual Retractable Integrated Combination Occupant Securement Lap and Shoulder Belt with triangular fittings to attach lap belt to stud on rear wheelchair tie-down retractor. The AL700686-2 includes an angled mounting bracket on the upper retractor to accommodate angled vehicle sidewall wire molding. -
Sale!
Sure-Lok AL712S-4C-7 Self-tensioning, automatic locking, wheelchair tie down kit with S-Hook and Dual Retractor Combination Occupant Securement Lap and Shoulder Belt with 45 Degree Bracket. The AL712S-4C-7 includes PLI L-Track Fittings for vehicles outfitted with L-Track Floor Anchorages. The AL712S-4C-7 Kit includes the following; 2-AL700855S Right Hand Retractor ( PLI L-Track L-Track) 2-AL700907S Left Hand Retractor (PLI L-Track) 1-AL200868-4 Dual Retractor Combination Occupant Securement with Height Adjustor and 45 Degree Bracket 1-Warranty Card (3 Year Manufacture Warranty) FREE SHIPPING -
Sale!
Sure-Lok FE201145 Heavy Duty Storage Container The FE201145 is made from heavyweight nylon fabric that offers a more rugged storage option for a complete Sure-Lok wheelchair and occupant securement system. The FE201145 Designed to withstand vigorous daily applications, the stronger nylon material of the Heavy Duty Storage Container provides greater durability and performance for your Sure-Lok system. FREE SHIPPING -
Sale!
Sure-Lok FE576 Manual Securement Kit with Snap Hook and D-Ring, Non-Retractable Occupant Restraint System, L-Track. This Kit will include the Following: 2-FE200602 Front Cam Buckle with Snap Hook and D-Ring, L-Track 2-FE200603 Over Center Buckle with Snap Hook and D-Ring, L-Track 1-FE200595 Integrated Lap Belt with Snap Hook 1-FE200599 Non Retractable Shoulder Belt, L-Track FREE SHIPPING -
Sale!
Sure-Lok FF612-4C FF600 Semi Automatic Retractor Kit with Buckle and Tab Attachment and Retractable Occupant Lap and Shoulder Belt Restraint and Height Adjustor. This Kit is designed for L-Track Floor Anchorages. The FF612-4C Kit includes the following; 2-FE200855: Right Hand FF600 Semi Automatic Retractor with Buckle and Tab Attachment. This Retractor is fitted for an L-Track Floor Anchorage 2-FE200907: Left Hand FF600 Semi Automatic Retractor with Buckle and Tab Attachment. This Retractor is fitted for an L-Track Floor Anchorage 1-FE200727HA: Retractable Integrated Combination Lap and Shoulder Belt with Height Adjuster FREE SHIPPING
